|Documents Home :: 4.2.6p4 :: keygen.html
from Alice's Adventures in Wonderland, Lewis Carroll
Alice holds the key.
Last update: 13-Nov-2009 0:44
ntp-keygen [ -deGHIMPT ] [ -c [RSA-MD2 | RSA-MD5 | RSA-SHA | RSA-SHA1 | RSA-MDC2 | RSA-RIPEMD160 | DSA-SHA | DSA-SHA1 ] ] [ -i group ] [ -m modulus ] [ -p passwd2 ] [ -q passwd1 ] [ -S [ RSA | DSA ] ] [ -s host ] [ -V nkeys ]
This program generates cryptographic data files used by the NTPv4 authentication and identity schemes. It can generate message digest keys used in symmetric key cryptography and, if the OpenSSL software library has been installed, it can generate host keys, sign keys, certificates and identity keys used by the Autokey public key cryptography. The message digest keys file is generated in a format compatible with NTPv3. All other files are in PEM-encoded printable ASCII format so they can be embedded as MIME attachments in mail to other sites.
When used to generate message digest keys, the program produces a file containing ten pseudo-random printable ASCII strings suitable for the MD5 message digest algorithm included in the distribution. If the OpenSSL library is installed, it produces an additional ten hex-encoded random bit strings suitable for the SHA1 and other message digest algorithms. Printable ASCII keys can have length from one to 20 characters, inclusive. Bit string keys have length 20 octets (40 hex characters). All keys are 160 bits in length.
The file can be edited later with purpose-chosen passwords for the ntpq and ntpdc programs. Each line of the file contains three fields, first an integer between 1 and 65534, inclusive, representing the key identifier used in the server and peer configuration commands. Next is the key type for the message digest algorithm, which in the absence of the OpenSSL library should be the string MD5 to designate the MD5 message digest algorithm. If the OpenSSL library is installed, the key type can be any message digest algorithm supported by that library. However, if compatibility with FIPS 140-2 is required, the key type must be either SHA or SHA1.Finally is the key itself as a printable ASCII string excluding the space and # characters. If not greater than 20 characters in length, the string is the key itself; otherwise, it is interpreted as a hex-encoded bit string. As is custom, # and the remaining characters on the line are ignored. Later, this file can be edited to include the passwords for the ntpq and ntpdc utilities. If this is the only need, run ntp-keygen with the -M option and disregard the remainder of this page.
The remaining generated files are compatible with other OpenSSL applications and other Public Key Infrastructure (PKI) resources. Certificates generated by this program should be compatible with extant industry practice, although some users might find the interpretation of X509v3 extension fields somewhat liberal. However, the identity keys are probably not compatible with anything other than Autokey.
Most files used by this program are encrypted using a private password. The -p option specifies the password for local files and the -q option the password for files sent to remote sites. If no local password is specified, the host name returned by the Unix gethostname() function, normally the DNS name of the host, is used. If no remote password is specified, the local password is used.
The pw option of the crypto configuration command specifies the read password for previously encrypted files. This must match the local password used by this program. If not specified, the host name is used. Thus, if files are generated by this program without password, they can be read back by ntpd without password, but only on the same host.
All files and links are usually installed in the directory /usr/local/etc, which is normally in a shared filesystem in NFS-mounted networks and cannot be changed by shared clients. The location of the keys directory can be changed by the keysdir configuration command in such cases. Normally, encrypted files for each host are generated by that host and used only by that host, although exceptions exist as noted later on this page.
This program directs commentary and error messages to the standard error stream stderr and remote files to the standard output stream stdout where they can be piped to other applications or redirected to a file. The names used for generated files and links all begin with the string ntpkey and include the file type, generating host and filestamp, as described in the Cryptographic Data Files section below
To test and gain experience with Autokey concepts, log in as root and change to the keys directory, usually /usr/local/etc. When run for the first time, or if all files with names beginning ntpkey have been removed, use the ntp-keygen command without arguments to generate a default RSA host key and matching RSA-MD5 certificate with expiration date one year hence. If run again, the program uses the existing keys and parameters and generates only a new certificate with new expiration date one year hence; however, the certificate is not generated if the -e or -q options are present.
Run the command on as many hosts as necessary. Designate one of them as the trusted host (TH) using ntp-keygen with the -T option and configure it to synchronize from reliable Internet servers. Then configure the other hosts to synchronize to the TH directly or indirectly. A certificate trail is created when Autokey asks the immediately ascendant host towards the TH to sign its certificate, which is then provided to the immediately descendant host on request. All group hosts should have acyclic certificate trails ending on the TH.
The host key is used to encrypt the cookie when required and so must be RSA type. By default, the host key is also the sign key used to encrypt signatures. A different sign key can be assigned using the -S option and this can be either RSA or DSA type. By default, the signature message digest type is MD5, but any combination of sign key type and sign digest type supported by the OpenSSL library can be specified using the -c option. At the moment, legacy considerations require the NTP packet header digest type to be MD5.
As described on the Authentication Options page, an NTP secure group consists of one or more low-stratum THs as the root from which all other group hosts derive synchronization directly or indirectly. For authentication purposes all hosts in a group must have the same group name specified by the -i option and matching the ident option of the crypto configuration command. The group name is used in the subject and issuer fields of trusted, self-signed certificates and when constructing the file names for identity keys. All hosts must have different host names, either the default host name or as specified by the -s option and matching the host option of the crypto configuration command. Most installations need not specify the -i option nor the host option. Host names are used in the subject and issuer fields of self-signed, nontrusted certificates and when constructing the file names for host and sign keys and certificates. Host and group names are used only for authentication purposes and have nothing to do with DNS names.
As described on the Authentication Options page, there are five identity schemes, three of which - IFF, GQ and MV - require identity keys specific to each scheme. There are two types of files for each scheme, an encrypted keys file and a nonencrypted parameters file, which usually contains a subset of the keys file. In general, NTP secondary servers operating as certificate signing authorities (CSA) use the keys file and clients use the parameters file. Both files are generated by the TA operating as a certificate authority (CA) on behalf of all servers and clients in the group.
The parameters files are public; they can be stored in a public place and sent in the clear. The keys files are encrypted with the local password. To retrieve the keys file, a host can send a mail request to the TA including its local password. The TA encrypts the keys file with this password and returns it as an attachment. The attachment is then copied intact to the keys directory with name given in the first line of the file, but all in lower case and with the filestamp deleted. Alternatively, the parameters file can be retrieved from a secure web site.
For example, the TA generates default host key, IFF keys and trusted certificate using the command
ntp-keygen -p local_passwd -T -I -igroup_name
Each group host generates default host keys and nontrusted certificate use the same command line but omitting the -i option. Once these media have been generated, the TA can then generate the public parameters using the command
ntp-keygen -p local_passwd -e >parameters_file
where the -e option redirects the unencrypted parameters to the standard output stream for a mail application or stored locally for later distribution. In a similar fashion the -q option redirects the encrypted server keys to the standard output stream.
All cryptographically sound key generation schemes must have means to randomize the entropy seed used to initialize the internal pseudo-random number generator used by the OpenSSL library routines. If a site supports ssh, it is very likely that means to do this are already available. The entropy seed used by the OpenSSL library is contained in a file, usually called .rnd, which must be available when starting the ntp-keygen program or ntpd daemon.
The OpenSSL library looks for the file using the path specified by the RANDFILE environment variable in the user home directory, whether root or some other user. If the RANDFILE environment variable is not present, the library looks for the .rnd file in the user home directory. Since both the ntp-keygen program and ntpd daemon must run as root, the logical place to put this file is in /.rnd or /root/.rnd. If the file is not available or cannot be written, the program exits with a message to the system log.
On systems that provide /dev/urandom, the randomness device is used instead and the file specified by the randfile subcommand or the RANDFILE environment variable is ignored.
File and link names are in the form ntpkey_key_name.fstamp, where key is the key or parameter type, name is the host or group name and fstamp is the filestamp (NTP seconds) when the file was created). By convention, key fields in generated file names include both upper and lower case alphanumeric characters, while key fields in generated link names include only lower case characters. The filestamp is not used in generated link names.
The key type is a string defining the cryptographic function. Key types include public/private keys host and sign, certificate cert and several challenge/response key types. By convention, files used for challenges have a par subtype, as in the IFF challenge IFFpar, while files for responses have a key subtype, as in the GQ response GQkey.
All files begin with two nonencrypted lines. The first line contains the file name in the format ntpkey_key_host.fstamp. The second line contains the datestamp in conventional Unix date format. Lines beginning with # are ignored.
The remainder of the file contains cryptographic data encoded first using ASN.1 rules, then encrypted using the DES-CBC algorithm and given password and finally written in PEM-encoded printable ASCII text preceded and followed by MIME content identifier lines.
The format of the symmetric keys file is somewhat different than the other files in the interest of backward compatibility. Since DES-CBC is deprecated in NTPv4, the only key format of interest is MD5 alphanumeric strings. Following the header the keys are entered one per line in the format
keyno type key
where keyno is a positive integer in the range 1-65,535, type is the string MD5 defining the key format and key is the key itself, which is a printable ASCII string 16 characters or less in length. Each character is chosen from the 93 printable characters in the range 0x21 through 0x7f excluding space and the '#' character.
Note that the keys used by the ntpq and ntpdc programs are checked against passwords requested by the programs and entered by hand, so it is generally appropriate to specify these keys in human readable ASCII format.
The ntp-keygen program generates a MD5 symmetric keys file ntpkey_MD5key_hostname.filestamp. Since the file contains private shared keys, it should be visible only to root and distributed by secure means to other subnet hosts. The NTP daemon loads the file ntp.keys, so ntp-keygen installs a soft link from this name to the generated file. Subsequently, similar soft links must be installed by manual or automated means on the other subnet hosts. While this file is not used with the Autokey Version 2 protocol, it is needed to authenticate some remote configuration commands used by the ntpq and ntpdc utilities.
It can take quite a while to generate some cryptographic values, from one to several minutes with modern architectures such as UltraSPARC and up to tens of minutes to an hour with older architectures such as SPARC IPC.