Last update: 21-Oct-2010 23:44 UTC
refclock_hopf_pci driver supports the hopf PCI-bus interface 6039 GPS/DCF77.
Additional software and information about the software drivers as well as the latest NTP driver source, executables, and documentation is maintained at http://www.ATLSoft.de/ntp.
The hopf clock driver has been tested on the following software and hardware platforms:
|i386 (PC)||Windows NT|
|i386 (PC)||Windows 2000|
The driver attempts to open the device
/dev/hopf6039 REFID. The device entry will be made by the installation process of the kernel module for the PCI-bus board. The driver sources belongs to the delivery equipment of the PCI-board.
The driver attempts to open the device by calling the function
OpenHopfDevice(). This function will be installed by the Device Driver for the PCI-bus board. The driver belongs to the delivery equipment of the PCI-board.
Specifies the driver reference identifier,
flag1 0 | 1
When set to 1, driver syncs even if only crystal driven.
Was this page helpful?
Glad to hear it!
Sorry to hear that.