hopf PCI-Bus Receiver (6039 GPS/DCF77)
Last update: June 27, 2022 19:03 UTC (8df55e5db)
Table of Contents
Synopsis
- Address:
127.127.39.X
- Reference ID:
hopf (default), GPS, DCF
- Driver ID:
HOPF_P
Description
The refclock_hopf_pci driver supports the hopf PCI-bus interface 6039 GPS/DCF77.
Additional software and information about the software drivers as well as the latest NTP driver source, executables, and documentation is maintained at http://www.atlsoft.de/ntp-tcp-netzwerkzeit/.
Operating System Compatibility
The hopf clock driver has been tested on the following software and hardware platforms:
| Platform |
Operating System |
| i386 (PC) |
Linux |
| i386 (PC) |
Windows NT |
| i386 (PC) |
Windows 2000 |
O/S System Configuration
UNIX
The driver attempts to open the device /dev/hopf6039 REFID. The device entry will be made by the installation process of the kernel module for the PCI-bus board. The driver sources belongs to the delivery equipment of the PCI-board.
Windows NT/2000
The driver attempts to open the device by calling the function OpenHopfDevice(). This function will be installed by the Device Driver for the PCI-bus board. The driver belongs to the delivery equipment of the PCI-board.
Fudge Factors
refid string-
Specifies the driver reference identifier, GPS or DCF.
flag1 0 | 1-
When set to 1, driver syncs even if only crystal driven.
Bernd Altmeier, Ing.-Büro für Software www.ATLSoft.de